Changing signal patterns
The unit cycles through different coupling modes, polarities and frequency ranges when a specific water setting is not available.
← PRODUCT OVERVIEW
PHYSICAL WATER TREATMENT · PRIVATE HOMES
WEHA W60
A compact system for detached homes and smaller water installations—fitted to the outside of the existing pipe, without salt or chemical additives.
PIPE DIAMETERup to 40 mm1.25 inches
FLOW CAPACITYup to 2 m³/hsmaller water systems
FREQUENCY RANGE0–60,000 Hzprogrammable
ORIGINAL WEHA PRODUCT
W60 model · Made in Germany
01No additives
No salt or chemical dosing.
02Easy to retrofit
Installed outside the pipe.
03Maintenance-free
No filters or consumables.
0410-year warranty
Technology from Baden-Württemberg.
THE W60 MODEL
One system for the whole home.
The W60 is fitted to the central supply pipe. Its electronic control unit sends defined electrical signals to cables wound around the outside of the pipe; water never passes through the device.
It can be used with different pipe materials and includes sensor-based flow detection for operating control during longer periods of absence.
Selection and manufacturing
Suitability depends on pipe diameter and material, flow rate and water conditions. WEHA products are manufactured in a facility operating in accordance with the quality principles of the ISO 9000 family.
DUAL-FIELD TECHNOLOGY
Two coupling methods.
Individually configurable.
The W60 supports inductive and capacitive signal coupling. The two modes can be activated separately to suit different water conditions.
- Inductive and capacitive couplingTwo independently selectable signal paths.
- Suitable for existing pipeworkExternal installation without opening the pipe.
- Sensor-based flow detectionPipe-temperature changes are used to detect water use.
- Flexible operating modesAutomatic operation or eight preset programmes.
Defined operating parameters
Preset parameters allow the system to be matched more closely to known water characteristics; frequencies can also be programmed.
TECHNICAL DATA
W60 at a glance.
Data for the model shown on this page.
- Power consumption
- 5 VA
- Control unit
- 55 × 125 × 205 mm
- Weight
- 0.5 kg
- Frequency
- 0–60,000 Hz
- Pipe diameter
- up to 40 mm (1.25″)
- Flow capacity
- up to 2 m³/h
- Pipe material
- different materials and ages
- Operating modes
- automatic or 8 programmes
ON-SITE INSTALLATIONS
Designed for existing buildings.
These photographs show W60 units installed on existing domestic pipework.
TECHNICAL DOCUMENTATION
Physical water treatment under documented test conditions.
Technical assessments and a test report are available for physical water treatment and the W60. Findings relate to the conditions examined and are not a universal performance guarantee.
AVAILABLE IN GERMANY ONLY
ENQUIRE ABOUT THE TRIAL →FREE HOME TRIAL
Test the suitable unit at home for three months.
This trial is available exclusively to customers with a residential and delivery address in Germany.
IS W60 RIGHT FOR YOUR HOME?
Let us review the application.
Send the pipe diameter and material, a photograph of the installation area and—if available—your water analysis.